Free Ferris SRS Z3X Series SRSZ3XKAVE3061 Parts Manual PDF | Manualsnet (2024)

Parts Manual Mfg. No: 5901691 SRS Z3X Series w/ 61" Mower Deck (SRSZ3XKAVE3061)

Copyright Briggs & Stratton. All Rights reserved 01-Sep-2023

Table Of Contents

Model Components Page 61" Mower Deck Group - Deck Hangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 61" Mower Deck Group - Housing, Covers, Spindles & Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 61" Mower Deck Group - Pulleys, Belt & Idler Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 61" Mower Deck Group - Rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Decal Group - Brand & Model - Models w/ 61" Mower Decks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Decal Group - Safety & Operation - Models w/ 61" Mower Decks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Deck Lift Group - Models w/ 61" Mower Decks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Electrical Group S/N: 2017890934 & Below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Electrical Group S/N: 2017890935 & Above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Electrical Schematic - Charging Circuit Kawasaki FX850V EFI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Electrical Schematic - Cranking Circuit Kawasaki FX850V EFI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Electrical Schematic - Ignition Grounding Circuit Kawasaki FX850V EFI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Electrical Schematic - PTO Op. Pres. Circuit Kawasaki FX850V EFI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Engine & PTO Group - Kawasaki FX Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Evap Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Fuel Hose & Supply Group - Models w/ Kawasaki Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Fuel Tank & Mount Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Hydraulic Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Instrument Control Panel Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Main Frame & Front Casters Group - Models w/ 61" Mower Decks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Motion Control Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Neutral Lockout Group S/N: 4000089208 and Below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Neutral Lockout Group S/N: 4000089209 and Above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Operator Compartment Group - S/N: 2017890934 & Below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Operator Compartment Group - S/N: 2017890935 & Above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Parking Brake Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Spindle Service Parts - 5104744. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Transaxle Drive Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Transaxle Service Parts Group - 5105286 / 5105285. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Wheel & Tire Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 3 01-Sep-2023

61" Mower Deck Group - Deck Hangers Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 4 01-Sep-2023

61" Mower Deck Group - Deck Hangers REF NO PART NO QTY DESCRIPTION

0010 5103282 2 WASHER, .52 X 1.75 X .14, CZ 0040 5020095 2 GREASE FITTING, 1/4-28 Straight 0060 5025013X12 8 BOLT, 3/8-16 X 1-1/2" GD5 CZ 0080 5025017X14 2 BOLT, 1/2-13 X 1-3/4 GD5 CZ 0090 5025056 2 NUT, 1/2-13 HEX NYLON LOCK 0100 5025089 2 NUT, 1/2-20 Hex Jam 0130 5025156 8 WASHER, 3/8 SAE 0140 5025158 2 WASHER, 1/2 SAE 0160 5025394 8 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0170 5025396 4 NUT, Hex Flange, Nylock, 1/2-13 0210 5109915FS 2 ADJUSTER, HEIGHT 0220 5104238 4 PIVOT, DECK LIFT TRUNION, GREASABLE 0250 5413899A 4 BRACKET, OUTER TRUNION MNT - BLK 0260 5413900A 4 BRACKET, INNER TRUNION MNT - BLK 0300 5025579 2 EYE BOLT, 1/2-20 X 4.25,1.88THRD,1EYE,CZ 0400 5025447 2 GREASE FITTING, 1/4-28 STRAIGHT, 90 DEGREE 0410 5045178 2 SPACER, .52 X 1.00 X .75, CZ 0680 5105582 2 SPRING, COMPRESSION, .76 X .97 X 2", BLK 0750 5104309 2 HANGER, FRONT DECK-2LINK, 5.5" EB 0760 5105629 2 ADJUSTER, SHORT, DECK LIFT, CZ 0780 80018782 2 CAPSCREW-HEX HD 7/16-14X2.000 G8 CL/ZC 0790 80004028 4 WSHR,7/16 ID X .065 THK, FLAT,ZINC/CLEAR 0800 5025533 2 NUT, HEX, 7/16-14, SER, FLG, GD5, YZ 0810 1930650 2 NUT-HEX FLANGE 7/16-14 TWO WAY LK GA BLK

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 5 01-Sep-2023

61" Mower Deck Group - Housing, Covers, Spindles & Blades Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 6 01-Sep-2023

61" Mower Deck Group - Housing, Covers, Spindles & Blades REF NO PART NO QTY DESCRIPTION

0020 5022308 6 BODY CLIP, 5/16-18-7GA MATERIAL 0030 5025390X8 18 BOLT, 3/8-16 X 1, FLANGE, GD 5, CZ

-(S/N: 4001759914 and below)(Torque spindle mounting bolts to 17 ft. lbs. (23 Nm)

0030 5025390X10 18 BOLT, 3/8-16 X 1-1/4, FLANGE, GD 5, CZ -(S/N: 4001759915 and above)(Torque spindle mounting bolts to 17 ft. lbs. (23 Nm)

0040 5025011X8 6 BOLT, 5/16-18 X 1" GRD5 YZ 0050 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 0060 5025145X6 2 BOLT, 5/16-18 X 3/4, CARRIAGE, GD5, CZ 0070 5025155 8 WASHER, 5/16" SAE 0080 5025320X14 3 BOLT, 5/8-11 X 1-3/4 GD8

-(Torque blade mounting bolt to 70 ft. lbs. (94 Nm) 0090 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0100 5025394 21 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0110 5025477 3 WASHER, BLADE BOLT, 9/16" F436, CZ 0120 5104744 3 SPINDLE ASSM, CAST IRON 8.0-6 BOLT, LS 0130 5061300 1 ROD, MOUNT, CHUTE, 61, CZ 0140 5101755S 1 BLADE SET, 61 DECK (3)

-(Set of 3 blades) 0150 5401344A 1 PLATE, DEFLECTOR - BLK 0160 5601067 1 DECK SHELL W/DECALS, SRSZ3-61 (5415143B)

-(S/N: 4001759914 and below) 0160 5601310 1 DECK SHELL W/DECALS, SRSZ3-61 (5422064B)

-(S/N: 4001759915 and above) 0170 5416489B 1 GUARD, LH 61 DECK, SRSZ3 - RED 0180 5416488B 1 GUARD, RH 61 DECK, SRSZ3 - RED 0190 5413499 1 CHUTE, RUBBER DISCHARGE (5104442)

-(5104442) 0200 84008171 1 MOUNT 0210 5413385A 1 SUPPORT, DISCHARGE CHUTE - BLK 0220 5025146X12 3 BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ 0230 5025011X6 1 BOLT, 5/16-18 X 3/4 GD5

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 7 01-Sep-2023

61" Mower Deck Group - Pulleys, Belt & Idler Arm Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 8 01-Sep-2023

61" Mower Deck Group - Pulleys, Belt & Idler Arm REF NO PART NO QTY DESCRIPTION

0280 5025406 3 WASHER, 3/4 BELLEVILLE CL/ZC 0290 5025405 3 NUT, 3/4-16 Hex 0300 5105004 3 PULLEY, SPNDL, 7.032"OB X .985"ID 0310 5025017X32 1 BOLT, 1/2-13 X 4" GD5 CZ 0320 5025017X36 1 BOLT, 1/2-13 X 4-1/2" GD5 YZ 0330 5025396 2 NUT, Hex Flange, Nylock, 1/2-13 0340 5416473A 1 WELD, IDLER ARM, MOWER DECK,SRS Z3 - BLK 0350 5100896 1 SPACER, .390 X 1.00 X 1.00 - YZ 0360 5044933 1 SPACER, .39 X .75 X .38, PM, CZ 0370 5025165 1 WASHER, 3/8" Fender 0380 5025013X18 1 BOLT, 3/8-16 X 2-1/4" GD5 CZ 0390 5025394 1 NUT, 3/8 - 16 HEX NYLOCK FLANGE

-(Qty: 2 - S/N: 2018105410 & Below) 0400 5104379 2 SPACER, IDLER ARM, 1/2 X 2.25 0410 5104383 2 BEARING, 6203-1/2", SEALED 0420 5104456 1 SPACER, .51 X .84 X 1.22, PM, CZ 0430 5105523 1 SPACER, .515 X 1.25 X 2.06, CZ

-(S/N: 4001759914 and below) 0430 5109520 1 SPACER, .52 X 2.00 X 1.88, CZ

-(S/N: 4001759915 and above) 0440 ----- 1 NLA - IDLER PULLEY

-(S/N: 4001876772 & Below)(Refer to Note: *) 0450 5025017X28 1 BOLT, 1/2-13 X 3-1/2, HEX HD, GD5, CZ (SV) 0460 5105092 1 SPRING, 1.52" OD X 10.70" FL X .234" WIRE, BLK 0470 5050407X8 3 KEY, 1/4 SQ X 1 0480 5023497 1 EYE BOLT, 3/8-16 X 5, 2.88THRD, 1EYE, CZ

-(S/N: 2018105410 & Below) 0490 5025128 1 NUT, 3/8-16 Hex Large Serrated Flange

-(S/N: 2018105410 & Below) 0500 5105453 1 BELT, 5V SECT, 145.40" EL, ARAMID, WRPD 0510 5105454 1 IDLER, 8" BACK SIDE, 1/2" ID, BLK ECOAT 0520 5105041 2 SHIELD, PULLEY, 1/2"ID X 2-7/8"OD, CZ 0530 5105459 3 SPACER, 1.00 X 1.50 X 1.875, STOD 0540 5105844 1 SPRING PULLER, 1/2-20, 5.00

-(S/N: 2018105411 & Above) 0550 5025098 1 NUT, Hex, Nylon Lock, 1/2-20

-(S/N: 2018105411 & Above) 0560 5025089 1 NUT, 1/2-20 Hex Jam

-(S/N: 2018105411 & Above) 0570 5025158 3 WASHER, 1/2 SAE

-(Qty: 1 - S/N: 2018105410 & Below) 0580 5025056 1 NUT, 1/2-13 HEX NYLON LOCK 0590 5109029 1 PULLEY, IDLER, 5.50, CI

-(S/N: 4001876773 & Above)(Includes items # 0590-10 to 0590-20). 0590-10 5020865 2 SNAP RING, Internal

-(S/N: 4001876773 & Above) 0590-20 5109021 2 BEARING, 6203-3RC3-1/2SRI2-Q

-(S/N: 4001876773 & Above) 0590-30 5105011 1 SPACER, .505 X .875 X .805, CZ

-(S/N: 4001876773 & Above) 0590-40 ----- 1 PULLEY HOUSING

-(S/N: 4001876773 & Above)(Refer to Note: *)

Note: *When replacing this pulley, order the higher serial number pulley. Note: *Replace with item #0590.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 9 01-Sep-2023

61" Mower Deck Group - Rollers Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 10 01-Sep-2023

61" Mower Deck Group - Rollers REF NO PART NO QTY DESCRIPTION

0020 5025146X36 3 BOLT, 3/8-16 X 4-1/2, CARRIAGE, GD5, CZ 0030 5025156 2 WASHER, 3/8 SAE 0060 5025013X36 2 BOLT, 3/8-16 X 4-1/2" GD5 CZ 0070 5105521 3 WHEEL, ANTI SCALP, 5" 0080 5105554 5 SPACER, .38 X .63 X 3.38, CZ 0090 5025394 5 NUT, 3/8 - 16 HEX NYLOCK FLANGE

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 11 01-Sep-2023

Decal Group - Brand & Model - Models w/ 61" Mower Decks Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 12 01-Sep-2023

Decal Group - Brand & Model - Models w/ 61" Mower Decks REF NO PART NO QTY DESCRIPTION

0010 5102210 1 DECAL, iCD CUTTING SYSTEM 0020 5022813 1 DECAL, 61" 0030 5105150 1 DECAL, FENDER, SRSZ1 / Z2, RH 0040 5105151 1 DECAL, FENDER, SRSZ1 / Z2, LH 0050 5104724 1 DECAL, FERRIS LOGO, MEDIUM 0060 5105633 2 DECAL, MODEL, SRSZ3X 0070 5103799 1 DECAL, FERRIS, 2.23" X 11.39"

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 13 01-Sep-2023

Decal Group - Safety & Operation - Models w/ 61" Mower Decks Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 14 01-Sep-2023

Decal Group - Safety & Operation - Models w/ 61" Mower Decks REF NO PART NO QTY DESCRIPTION

0020 5061245 2 DECAL, Pinch Point 0030 5108214 1 DECAL, CUT HEIGHT, SRSZ2 & Z3 0040 5100957 1 DECAL, HYDRAULIC OIL, SAE 20W50

-(Located on battery box mount.) 0050 5103184 2 DECAL, WARNING, HAND IN BELT, ENG ONLY

-(Located on engine deck by transmission fans.) 0060 7101665 2 DECAL, DANGER DO NOT OPERATE W/O DEFLECT 0070 84008378 1 DECAL, Danger 0080 5104269 1 DECAL, SPANISH MANUAL, IGES, C-TICK

-(Located on tower underneath deck lift box.) 0090 5109418 1 DECAL, WARNING, TANK OVERFILL 0100 5105095 1 DECAL, DASH PANEL, RH, WARNING/CONTROLS 0110 5105081 1 DECAL, DASH PANEL, LH, CONTROLS 0120 5106593 1 DECAL, BELT ROUTING, SRSZ3-52/61 0130 5105598 2 DECAL, TRANSAXLE RELEASE

-(Located by transmission release levers.) 0140 5108042 1 DECAL, CUT HEIGHT, STAND ON

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 15 01-Sep-2023

Deck Lift Group - Models w/ 61" Mower Decks Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 16 01-Sep-2023

Deck Lift Group - Models w/ 61" Mower Decks REF NO PART NO QTY DESCRIPTION

0020 5104267 5 BALL JOINT, 1/2-20, RH, MALE, METAL RACE 0040 5020095 4 GREASE FITTING, 1/4-28 Straight 0050 5021541 2 BUSHING, FLANGE 0070 5025013X22 4 BOLT, 3/8-16 X 2-3/4" GD5 CZ 0080 5025017X14 3 BOLT, 1/2-13 X 1-3/4 GD5 CZ

-(Both front and right rear deck lift rod connection points). 0090 5025056 4 NUT, 1/2-13 HEX NYLON LOCK 0100 5025089 6 NUT, 1/2-20 Hex Jam 0110 5025150 2 WASHER, 1/2" USSZ 0120 5025155 2 WASHER, 5/16" SAE 0130 5025156 5 WASHER, 3/8 SAE 0140 5025158 5 WASHER, 1/2 SAE 0150 5025165 5 WASHER, 3/8" Fender 0160 5025394 6 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0170 5025396 4 NUT, Hex Flange, Nylock, 1/2-13 0180 5025443 3 BOLT, 3/8-16 X 3/4, PLT W/PATCH 0190 5100548 1 WASHER, .390 X 1.50 X .109, YZ 0200 5100634 4 PIVOT BLOCK, PLASTIC 0240 5403925AA 2 PLATE, PIVOT BLOCK SUPPORT - BLK 0270 5415156A 1 WELD, SHAFT, DECK LIFT, SRSZ3 - BLK 0280 5421638AA 1 WELD, DECK LIFT LEVER, SRSZ3 - BLK 0290 5104610 1 PIN, HITCH, 3/8" DIA X 2.5" EL, CZ 0310 5105322 1 ROD, DECK LIFT LATCH 0320 5061010 2 WASHER, FRICTION 0330 5023343 6 BUSHING, 1.00 X 1.13 X 1.38, Plastic 0340 5414040AA 1 PLATE, LATCH, PUSH BUTTON LIFT - BLK 0350 5105323 1 BUTTON, PUSH, DECK LIFT, THREADED 0360 1722291 1 GRIP,LIFT LEVER 0370 1723321 1 SPRING-COMP 0.715ODX 03.85 LG 0380 5414171A 1 PLATE, LATCH GUIDE - BLK 0420 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0430 5100732 2 SPACER, .52 X 1.00 X 2.09 - SS 0440 5100731 2 ROLLER, DECK HEIGHT 0450 5025017X20 1 BOLT, 1/2-13 X 2-1/2" GD5 CZ 0460 5025017X28 2 BOLT, 1/2-13 X 3-1/2, HEX HD, GD5, CZ (SV) 0480 5048049 1 SPACER, .50 X .75 X .66, CZ 0500 5023392 1 SPRING-EXT, 1.393 ODX13.25LGX.218WR, BLK 0510 5102118 1 EYE BOLT, 3/8-16 X 6.88, 3THRD, 1EYE 0530 84008736 1 PIVOT, RH 0540 84008735 1 PIVOT, LH 0550 5025154 4 WASHER, 1/4 SAE 0560 5025010X6 4 BOLT, 1/4"-20 X 3/4" GD5 YZ 0570 5025391 4 NUT, 1/4-20 Hex Nylock Flange 0580 5414118AA 1 PLATE, BRACKET, DECK LIFT SUPPORT - BLK 0590 5025011X8 2 BOLT, 5/16-18 X 1" GRD5 YZ 0600 5025017X16 1 BOLT, 1/2-13 X 2" GD5 CZ 0610 5101376 1 SPACER, .52 X 1.00 X .25, CZ 0620 5105586 1 SPACER, STEP, .390 X 1.00 X 2.13, CZ 0630 5105653 1 ROD, .88 X 1.50, THREADED, CZ 0640 5105654 1 ROD, .63 X 10.00, THREADED W/FLATS, CZ 0650 5105655 1 TUBE, .641 X .88OD X 8.75, THREADED, CZ

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 17 01-Sep-2023

Deck Lift Group - Models w/ 61" Mower Decks Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 18 01-Sep-2023

Deck Lift Group - Models w/ 61" Mower Decks REF NO PART NO QTY DESCRIPTION

0660 5105269 2 ROD, .75 X 22.00" TAPPED 1/2-20 0670 5025128 1 NUT, 3/8-16 Hex Large Serrated Flange 0730 5025013X28 1 BOLT, 3/8-16 X 3-1/2" GD5 CZ 0740 5025017X12 1 BOLT, 1/2-13 X 1-1/2 GD5 CZ 0770 1702779 1 JOINT-BALL .500-20 THD .500ID, CLR ZINC

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 19 01-Sep-2023

Electrical Group S/N: 2017890934 & Below Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 20 01-Sep-2023

Electrical Group S/N: 2017890934 & Below REF NO PART NO QTY DESCRIPTION

0020 ----- 1 BATTERY, 11U1L, 350 CCA -(Refer to Note: *)

0030 5021670 1 STRAP, RUBBER 0040 5104879 1 MODULE, TIME DELAY, NO DIODE 0060 5025010X8 2 BOLT, 1/4-20 X 1" GD5 CZ 0070 5025013X8 2 BOLT, 3/8-16 X 1" GD5 CZ 0080 5025126 2 NUT, 1/4-20 HEX SERR. FLANGE 0090 5025154 3 WASHER, 1/4 SAE 0100 5025156 2 WASHER, 3/8 SAE 0110 5025179X6 2 SCREW, #10-24 X 3/4" ROUND PHILLIPS 0120 5025270 2 SCREW, #10-24 X 1 RS, CZ 0130 5025271 4 NUT, Hex, Nylon Lock, #10-24 0140 5025391 6 NUT, 1/4-20 Hex Nylock Flange 0150 5025394 2 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0160 5021542 1 BATTERY CABLE, POS, 30, 1/4-5/16 0170 5050927X19 1 WIRE LOOM, 3/8 ID X 19 IN 0180 5100688 1 BATTERY BOX, W/ DRAIN HOLE 0190 5101396 1 CABLE, BATTERY, NEG, 30, 1/4-5/16 0210 5105537 1 HARNESS, Wiring, Stand-On ZTR 0220 5416573B 1 WELD, BATTERY/HYDRO MNT, SRS - RED 0240 1704379 2 SWITCH-PUSH BUTTON OP PRES BLACK SNAP IN 0250 5021029 3 TIE, SELF-LOCKING, 12" 0260 5104705 5 ROSEBUD LOOM CLIP 0270 5102075 1 MODULE, THROTTLE CONTROL, KAV DFI 0280 5105601 1 HARNESS, JUMPER, KAWASKI EFI 0310 5416656A 1 PLATE, BRAKE SWITCH, Z3 - BLK 0320 5415790AA 1 PLATE, WIRE GUIDE / TDM MOUNT, EFI - BLACK 0330 5414289A 1 PLATE, OPC, STAND ON - BLK 0340 5416834 1 HARNESS, JUMPER, BRAKE SWITCH 0350 5025010X12 1 BOLT, 1/4-20 X 1-1/2 GD5 CZ 0370 80003518 2 BOLT,1/4-20X0.750,GR5,STD NECK,SQ,ZC/CL

Note: *Not for sale. Obtain locally.

Footnotes:

Not F or

Repro duct io

Copyright Briggs & Stratton. All Rights reserved 21 01-Sep-2023

Electrical Group S/N: 2017890935 & Above Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 22 01-Sep-2023

Electrical Group S/N: 2017890935 & Above REF NO PART NO QTY DESCRIPTION

0020 ----- 1 BATTERY, 11U1L, 350 CCA -(Refer to Note: *)

0030 5021670 1 STRAP, RUBBER 0040 5104879 1 MODULE, TIME DELAY, NO DIODE 0050 ----- 2 HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR 0060 5025010X8 5 BOLT, 1/4-20 X 1" GD5 CZ 0070 5025013X8 2 BOLT, 3/8-16 X 1" GD5 CZ 0080 5025126 2 NUT, 1/4-20 HEX SERR. FLANGE 0090 5025154 3 WASHER, 1/4 SAE 0100 5025156 2 WASHER, 3/8 SAE 0110 5025179X6 2 SCREW, #10-24 X 3/4" ROUND PHILLIPS 0120 5025270 2 SCREW, #10-24 X 1 RS, CZ 0130 5025271 4 NUT, Hex, Nylon Lock, #10-24 0140 5025391 6 NUT, 1/4-20 Hex Nylock Flange 0150 5025394 2 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0160 5021542 1 BATTERY CABLE, POS, 30, 1/4-5/16 0170 5050927X19 1 WIRE LOOM, 3/8 ID X 19 IN 0180 5100688 1 BATTERY BOX, W/ DRAIN HOLE 0190 5101396 1 CABLE, BATTERY, NEG, 30, 1/4-5/16 0200 5103761 1 FIR TREE MOUNT, PACKARD

-(Secures sealed fuse holders in place.) 0210 5105537 1 HARNESS, Wiring, Stand-On ZTR 0220 5416573B 1 WELD, BATTERY/HYDRO MNT, SRS - RED 0240 1732004 2 SWITCH, Push Button, NO, Black 0250 5021029 3 TIE, SELF-LOCKING, 12" 0260 5104705 5 ROSEBUD LOOM CLIP 0270 5102075 1 MODULE, THROTTLE CONTROL, KAV DFI 0280 5105601 1 HARNESS, JUMPER, KAWASKI EFI 0310 5416656A 1 PLATE, BRAKE SWITCH, Z3 - BLK 0320 5415790AA 1 PLATE, WIRE GUIDE / TDM MOUNT, EFI - BLACK 0330 5105692 1 PLATE, SWITCH, OPC, SRSZ, CZ 0340 5416834 1 HARNESS, JUMPER, BRAKE SWITCH 0350 5025010X12 1 BOLT, 1/4-20 X 1-1/2 GD5 CZ 0360 80004801 2 BOLT,1/4,PUSHNUT RETAINER,PHOSPHATE/OIL 0370 80003518 2 BOLT,1/4-20X0.750,GR5,STD NECK,SQ,ZC/CL 0380 5021500 2 CLAMP, VINYL INSULATED, 1.00

Note: *Not for sale. Obtain locally.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 23 01-Sep-2023

Electrical Schematic - Charging Circuit Kawasaki FX850V EFI Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 24 01-Sep-2023

Electrical Schematic - Charging Circuit Kawasaki FX850V EFI REF NO PART NO QTY DESCRIPTION

5105537 5105537 1 HARNESS, Wiring, Stand-On ZTR 5416834 5416834 1 HARNESS, JUMPER, BRAKE SWITCH 5105601 5105601 1 HARNESS, JUMPER, KAWASKI EFI

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 25 01-Sep-2023

Electrical Schematic - Cranking Circuit Kawasaki FX850V EFI Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 26 01-Sep-2023

Electrical Schematic - Cranking Circuit Kawasaki FX850V EFI REF NO PART NO QTY DESCRIPTION

5105537 5105537 1 HARNESS, Wiring, Stand-On ZTR 5416834 5416834 1 HARNESS, JUMPER, BRAKE SWITCH 5105601 5105601 1 HARNESS, JUMPER, KAWASKI EFI

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 27 01-Sep-2023

Electrical Schematic - Ignition Grounding Circuit Kawasaki FX850V EFI Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 28 01-Sep-2023

Electrical Schematic - Ignition Grounding Circuit Kawasaki FX850V EFI REF NO PART NO QTY DESCRIPTION

5105537 5105537 1 HARNESS, Wiring, Stand-On ZTR 5416834 5416834 1 HARNESS, JUMPER, BRAKE SWITCH 5105601 5105601 1 HARNESS, JUMPER, KAWASKI EFI

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 29 01-Sep-2023

Electrical Schematic - PTO Op. Pres. Circuit Kawasaki FX850V EFI Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 30 01-Sep-2023

Electrical Schematic - PTO Op. Pres. Circuit Kawasaki FX850V EFI REF NO PART NO QTY DESCRIPTION

5105537 5105537 1 HARNESS, Wiring, Stand-On ZTR 5416834 5416834 1 HARNESS, JUMPER, BRAKE SWITCH 5105601 5105601 1 HARNESS, JUMPER, KAWASKI EFI

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 31 01-Sep-2023

Engine & PTO Group - Kawasaki FX Models Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 32 01-Sep-2023

Engine & PTO Group - Kawasaki FX Models REF NO PART NO QTY DESCRIPTION

0010 ----- 1 ENGINE, KAWASAKI, EFI (FX850 -AS42-S) 0020 5103300 1 BOLT, CRANKSHAFT, 7/16-20 X 3-1/4, GD 8

-(Torgue clutch bolt to 65 ft. lbs (88 Nm)) 0030 ----- 1 CLUTCH, if replacing use new clutch p/n 5110177 and water guard p/n 5108851.

-(S/N: 4002038354 and below) 0030 5110177 1 CLUTCH, 250 LBS., 1.13", WGC

-(S/N: 4002038355 and above) 0030-10 5600575 1 KIT, CLUTCH WIRE REPAIR 0035 5108851 1 WATER GUARD, WARNER C 250 FT-LBS CLUTCH

-(S/N: 4002038355 and above) 0040 5105326 1 MUFFLER, 30 HP KAWASAKI, SRSZ3 0060 5050407X10 1 KEY, 1/4" SQ. X 1-1/4 0070 5021682 1 PULLEY, 4.75 OD X 1-1/8 BORE, BC-48 0080 5101492 1 TIE,SELF-LOCKING, 24" 0090 5025585 2 BELLEVILLE WASHER, 1.1875 X .442 X .098 0100 80003675 2 NUT, 5/16-1/8, HEX, CNTR LK, ZINC PHOS/OIL 0110 5416110AA 1 PLATE, EXHAUST BRACKET LH - BLK 0120 5416111AA 1 PLATE, EXHAUST BRACKET RH - BLK 0130 5025155 6 WASHER, 5/16" SAE 0140 5025011X6 2 BOLT, 5/16-18 X 3/4 GD5 0150 5404967AA 1 ANCHOR, CLUTCH - BLK 0200 5103944 1 GROMMET, 7/8"ID, 1/4" THICK STK 0210 5025536 1 NUT, HEX, M8-1.25, CZ, GD 8.8 0220 5050862X12 1 WIRE LOOM, 3/4 ID X 12 IN 0230 5021030 2 TIE, SELF-LOCKING, 6" 0240 5100926 1 SPACER, 1.13 X 1.75 X 1.35, CZ 0250 5102271 1 SHIM, .062 THK X 1-1/8 ID X 1-5/8 OD 0260 5416571B 1 PLATE, FAN GUARD - RED 0270 5025059X6 3 BOLT, 5/16-18 X 3/4", SELF-TAPPING 0280 5021500 1 CLAMP, VINYL INSULATED, 1.00 0290 5025010X6 1 BOLT, 1/4"-20 X 3/4" GD5 YZ 0300 5025391 1 NUT, 1/4-20 Hex Nylock Flange 0310 5025154 1 WASHER, 1/4 SAE 0320 5105630 1 HOSE, OIL DRAIN, 24" 0330 5022234 1 ADAPTER, Oil Drain 0340 5025640 4 BOLT, 3/8-16X1-1/4 SF, GD8, PHOS, SER HD

-(Torque engine mount bolts to 17 ft. lbs (23 Nm)) 0350 5025011X8 4 BOLT, 5/16-18 X 1" GRD5 YZ 0360 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0370 5025249 1 BOLT, M8-1.25 X 20 MM GD 8.8

-(Not illustrated)

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 33 01-Sep-2023

Evap Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 34 01-Sep-2023

Evap Group REF NO PART NO QTY DESCRIPTION

0020 5103062 1 FITTING, 3/16" TEE, BARB TYPE, HDPE 0030 80025019 1 FILTER, FUEL 0040 7700552X15 1 HOSE, VAPOR, 5MM ID, 15.00 LG 0050 7700552X15 1 HOSE, VAPOR, 5MM ID, 15.00 LG 0060 5021030 5 TIE, SELF-LOCKING, 6" 0060 5100581 1 TIE,SELF-LOCKING, 8" 0070 7700552X2 1 HOSE, VAPOR, 5MM ID, 2.00 LG

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 35 01-Sep-2023

Fuel Hose & Supply Group - Models w/ Kawasaki Engine Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 36 01-Sep-2023

Fuel Hose & Supply Group - Models w/ Kawasaki Engine REF NO PART NO QTY DESCRIPTION

0010 5050831X23 1 HOSE, 1/4" FUEL, 23.00" 0020 93807 2 CLAMP, Hose

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 37 01-Sep-2023

Fuel Tank & Mount Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 38 01-Sep-2023

Fuel Tank & Mount Group REF NO PART NO QTY DESCRIPTION

0010 5104686 1 FUEL CAP, 3.25", MANAGED VENT, 16"TETHER 0020 5025010X16 2 BOLT, 1/4-20 X 2, GD5 0030 5025391 2 NUT, 1/4-20 Hex Nylock Flange 0040 5025154 2 WASHER, 1/4 SAE 0050 5025011X9 4 BOLT, 5/16-18 X 1-1/8 GD5 CZ 0060 5025155 4 WASHER, 5/16" SAE 0070 5022308 4 BODY CLIP, 5/16-18-7GA MATERIAL 0080 5104970 1 TANK, FUEL, SRSZ3

-(Includes Components 0080-10, 0080-20, 0080-30, 0080-40, 0080-50 & 0080-60)

0080-10 209043 1 GROMMET (SV) 0080-20 770046 1 REMOTE VENT ASSEMBLY 0080-30 5105477 1 GAUGE, FUEL, 18.5", MAG

-(Includes component 0080-50) 0080-40 5104994 1 ASM, PICKUP TUBE, FUEL TANK, 18.00" 0080-50 5105477X1 1 RUBBER SEAL

-(Included with component 0080-30) 0080-60 1726400 1 BUSHING-FUEL TANK RED RUBBER 0090 5415124A 1 STRAP, FUEL TANK, SRSZ3 - BLK 0100 5415123B 1 PLATE, TANK MOUNT, SRSZ3 - RED 0110 84008512 2 SCREW, SOC HD, 5/16-18 X 1/2

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 39 01-Sep-2023

Hydraulic Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 40 01-Sep-2023

Hydraulic Group REF NO PART NO QTY DESCRIPTION

0010 5107881 1 TRANSAXLE, ZT-4400, LH, LONG AXLE 0020 5107880 1 TRANSAXLE, ZT-4400, RH, LONG AXLE 0030 5105330 2 FAN, ZT-4400, H/G#54084, SRSZ3 & IS2100 0040 5101998 2 HYDRO TANK, HYDRO-GEAR 71938, 1 LITER 0040-10 5100778X1 2 RESERVIOR CAP

-(One per hydraulic oil tank) 0050 5025392 1 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0060 5025010X6 4 BOLT, 1/4"-20 X 3/4" GD5 YZ 0070 5025010X8 2 BOLT, 1/4-20 X 1" GD5 CZ 0080 5025011X6 1 BOLT, 5/16-18 X 3/4 GD5 0090 5025154 6 WASHER, 1/4 SAE 0100 5025155 3 WASHER, 5/16" SAE 0110 5025391 6 NUT, 1/4-20 Hex Nylock Flange 0130 80002736 2 PIN, 3/32 X 0.750, COT, ZINC/CLEAR 0140 5021164 4 CLAMP, #10 HOSE, STAINLESS 0150 5415122B 1 MOUNT, HYDRO BOTTLE, SRSZ3 - RED 0160 5050933X27 1 HOSE, 5/8, PUSH-LOCK, 27.00 0170 5050933X50 1 HOSE, 5/8, PUSH-LOCK, 50.00 0180 5101987X1 2 FITTING, BREATHER, ZT5400 0190 5023263 2 CLAMP, VINYL INSULATED, 1.75 0200 5025535 8 BOLT,HEX FLG,SER,GD8 1/2-13X1-1/4W/PATCH 0210 5105462 2 ROD, HYDRO RELEASE, SRSZ3, CZ 0220 84008793 2 LEVER, Actuator 0240 5102916 2 NUT, ZT5400

-(Torque transaxle fan nut to 540-660 in-lbs (61-75 Nm) 0250 5105331 2 PULLEY, ZT-4400, H/G#54230, SRSZ3 0260 5105332 2 HUB, ZT-4400, H/G#54087, SRSZ3 & IS2100 0270 5021500 2 CLAMP, VINYL INSULATED, 1.00 0280 5023202 2 WASHER,WAVE,M10 0290 5105628 2 KNOB, PLASTIC, 5/16 THRD 0320 5025211 2 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ 0330 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 0340 5100384X8 2 LOOM, CONVOLUTED SPLIT, 1" ID - 8" LONG 1000 5105287 1 KIT, FAN & PULLEY, REPLACEMENT

-(Service Kit that consists of items: 0240, 0030, 0250 & 0260)

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 41 01-Sep-2023

Instrument Control Panel Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 42 01-Sep-2023

Instrument Control Panel Group REF NO PART NO QTY DESCRIPTION

0010 5104697 1 PTO SWITCH, MOMENTARY, SMALL KNOB 0020 84008510 1 HOURMETER 0030 5020927 1 SWITCH, IGNITION, 6 POST 0030-10 5022789 1 KEY, IGNITION MOLDED SET 0030-20 5022790 1 COVER, PLASTIC, SNAP ON 0030-30 5022791 1 PLASTIC NUT 0050 5601071 1 DASH PANEL W/DECALS, SRS Z3, KAWI 0060 5106757 6 SCREW, FLANGE, ALLEN HD, 1/4-20 X .75 SS 0070 5022665 6 BODY CLIP, 1/4-20 X 1/2" DEEP 0080 5022222 1 RING, SWITCH RETAINER 0130 5103809 1 LIGHT, INDICATOR, PANEL, LED, RED 0140 5102218 1 BODY, ROCKER SWITCH 0150 5102219 1 ACTUATOR, ROCKER SWITCH - RED

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 43 01-Sep-2023

Main Frame & Front Casters Group - Models w/ 61" Mower Decks Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 44 01-Sep-2023

Main Frame & Front Casters Group - Models w/ 61" Mower Decks REF NO PART NO QTY DESCRIPTION

0010 ----- 1 WELD, MAIN FRAME, SRSZ3 61 - RED -(Refer to Note: *)

0010-10 5020883 4 CUP, BEARING (SV) 0020 5020884 4 BEARING, TAPERED ROLLER, 1" 0030 5021072 2 SEAL, GREASE 0040 5025448 2 NUT, 3/4-16, HEX JAM NYLON LOCK 0050 5109845 2 CAP, GREASE, LOW PROFILE 0060 5025449 4 WASHER, BELLEVILLE - 1.500 X .755 0070 5041476 1 SPACER, 1.02 x 1.56 x .50 0080 ----- 8 SPACER

-(S/N: 4000162964 & Below)(Refer to Note: *) 0080 5108732 8 SPACER, .765 X 1.500 X .500, TPRD CZ

-(S/N: 4000162965 & Above) 0090 5047461 8 SPACER, .76 x 1.00 x .25 0100 5411934B 2 WELD, CASTER YOKE - RED 0110 ----- 1 USE 5421637B - WELD, TOWER, SRSZ3 - RED

-(S/N: 4001932990 and below)(Refer to Note: *) 0110 5421637B 1 WELD, TOWER, SRSZ3 - RED

-(S/N: 4001932991 and above) 0120 5415454A 1 WELD, CROSS BRACE, SRSZ3 - BLK 0130 5102702 2 PAD, FRICTION, .375 X 1.25 X 4.00 0140 5025594 4 SCREW, 5/16-18 X 1, PHILLIPS HD, BZ 0150 5025156 10 WASHER, 3/8 SAE 0170 5025013X10 5 BOLT, 3/8-16 X 1-1/4" GD5 CZ 0180 5025394 10 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0200 5025013X36 2 BOLT, 3/8-16 X 4-1/2" GD5 CZ 0220 5105554 2 SPACER, .38 X .63 X 3.38, CZ 0230 5025457 2 BOLT, 1/4-28 X 1/2, GD5 YZ 0240 5025013X8 3 BOLT, 3/8-16 X 1" GD5 CZ 0250 5415126B 1 PLATE, FOOT GUARD, SRSZ3 - RED 0290 5025155 6 WASHER, 5/16" SAE 0300 5022308 4 BODY CLIP, 5/16-18-7GA MATERIAL 0310 5025011X8 6 BOLT, 5/16-18 X 1" GRD5 YZ 0320 5416003B 1 WELD, FRONT PIVOT, SRSZ3 61 -RED 0330 5025018X10 1 BOLT, 1/2-20 X 1-1/4" GD5 CZ 0340 5105436 4 ROD, FRONT END SUPPORT, CZ, SRSZ3 0350 5022039 4 BALL JOINT, 3/4-16, MALE 0360 5102756 4 BALL JOINT, 3/4-16 MALE, LH 0370 5105457 1 BUSHING, CENTER BONDED, J-6310-1 0390 5025452 2 BODY CLIP, 5/16-18 -1/4 MATERIAL 0400 5415651B 1 WELD, FRONT GUARD, SRSZ3 72 - RED

-(S/N: 4002034980 and below) 0400 5415651B-RPLC 1 Refer to: Muffler Heat Shield Group - S/N: 4002034981 & Above

-(S/N: 4002034981 and above) 0410 5025265X24 8 BOLT, 3/4-16 X 3" YZ GD5 0420 5025284 8 NUT, Hex, Nylon Lock, 3/4-16 0430 REF-WASHER 1 WASHER

-(S/N: 4000629850 & Below)(Refer to Note: **)

Note: *If replacing contact the Service Department at 1-800-933-6175. Note: *If replacing this spacer for units in this serial number range, replace all eight spacers with the spacer listed in the higher serial number range Note: *If replacing, use 5421637B and 5421638AA) Note: **Replace items #0430 and #0500 with items #0510 and #0520, respectively.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 45 01-Sep-2023

Main Frame & Front Casters Group - Models w/ 61" Mower Decks Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 46 01-Sep-2023

Main Frame & Front Casters Group - Models w/ 61" Mower Decks REF NO PART NO QTY DESCRIPTION

0440 5025093 4 NUT, Hex, Jam, 3/4-16 0450 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0470 5105521 2 WHEEL, ANTI SCALP, 5" 0480 5025580 4 NUT, 3/4-16 HEX JAM, LH 0490 5021125X14 1 ALUM. FOIL TAPE - 14.00 LONG

-(S/N: 4002034980 and below) 0500 ----- 1 SPACER

-(S/N: 4000629850 & Below)(Refer to Note: **) 0510 5108172 1 WASHER. .52 X 2.5 X .25

-(S/N: 4000629851 & Above) 0520 5108173 1 SPACER, 1.015 X 1.562 X .615

-(S/N: 4000629851 & Above) 0530 5025160 2 WASHER, 3/4 SAE

Note: *If replacing contact the Service Department at 1-800-933-6175. Note: *If replacing this spacer for units in this serial number range, replace all eight spacers with the spacer listed in the higher serial number range Note: *If replacing, use 5421637B and 5421638AA) Note: **Replace items #0430 and #0500 with items #0510 and #0520, respectively.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 47 01-Sep-2023

Motion Control Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 48 01-Sep-2023

Motion Control Group REF NO PART NO QTY DESCRIPTION

0010 84008277 1 CONTROL, Handle 0020 5416816A 1 WELD, CONTROL HANDLE, LH, SRS Z3 - BLK 0030 5416114A 2 PLATE, CONTROL MOUNT, SRSZ3 - BLK 0040 5413594A 1 WELD, REAR HANDLE, STAND ON - BLK 0050 5413706A 1 WELD, FRONT HANDLE, STAND ON - BLK 0060 5415998A 1 PLATE, SPEED ADJUSTMENT, SRSZ3 - BLK 0070 5104609 1 PULL PIN, 3/8" DIA X 9/16" STROKE 0080 5105313 2 ROD, MOTION CONTROL, Z3 0090 5104608 1 ROD, 5/16-24 X 4.25, CZ 0100 5104495 1 BALL JOINT, 5/16-24 LH FEMALE W/STUD, BR 0110 5104493 1 BALL JOINT 5/16-24 RH FEMALE BRONZE RACE 0120 5104494 2 BALL JOINT 5/16-24 LH FEMALE BRONZE RACE 0130 5025033 9 NUT, Hex, 5/16-24 0140 5023212 1 NUT, 5/16-24 HEX, LH 0150 5025045 3 NUT, 5/16-24 HEX NYLON LOCK 0160 5041930 2 SPACER, .38 X .50 X .27, CZ 0170 5025013X8 4 BOLT, 3/8-16 X 1" GD5 CZ 0190 5025394 4 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0200 5025015X6 2 BOLT, 7/16-14 X 3/4, GD 5 YZ 0210 5025044 2 NUT, 7/16-14 HEX TOP LOCK 0230 5025011X12 2 BOLT, 5/16-18 X 1-1/2" GD5 YZ 0240 5025155 1 WASHER, 5/16" SAE 0250 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0260 5025011X8 1 BOLT, 5/16-18 X 1" GRD5 YZ 0280 5025127 1 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 0350 5025096 8 NUT, 3/8-16 HEX NYLON LOCK 0360 5025156 12 WASHER, 3/8 SAE 0370 5025013X10 2 BOLT, 3/8-16 X 1-1/4" GD5 CZ 0380 5101715 2 GRIP, FOAM, .48 x 10 x .125 Black 0390 5025013X6 6 BOLT, 3/8-16 X 3/4" GD5 CZ 0400 5022846 2 BEARING-FLANGE, 5/8 0410 5104885 2 BEARING, BRONZE, FLANGED, 5/8", FLB10 0420 5025057 3 NUT, Hex, Nylon Locking, 5/16-18 0430 5025618X12 2 SCREW, SOC HD, 5/16-18 X 1-1/2, BLK 0440 5102148 3 SPACER, .33 X .50 X .50, YZ 0460 5104833 2 BALL JOINT, 5/16-24 RH FEMALE W/STUD, BR 0470 5025011X14 1 BOLT, 5/16-18 X 1-3/4" GD5 YZ

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 49 01-Sep-2023

Neutral Lockout Group S/N: 4000089208 and Below Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 50 01-Sep-2023

Neutral Lockout Group S/N: 4000089208 and Below REF NO PART NO QTY DESCRIPTION

0010 5416486A 1 WELD, NEUTRAL LOCK SHAFT - BLK 0020 5101123 2 BEARING, 1/2 FLANGED, PLASTIC BALL 0030 5025011X16 1 BOLT, 5/16-18 X 2" GD5 YZ 0040 5025127 2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 0050 5025010X6 4 BOLT, 1/4"-20 X 3/4" GD5 YZ 0060 5025154 4 WASHER, 1/4 SAE 0070 5025391 4 NUT, 1/4-20 Hex Nylock Flange 0080 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0090 5025011X18 1 BOLT, 5/16-18 X 2-1/4" GD5 YZ

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 51 01-Sep-2023

Neutral Lockout Group S/N: 4000089209 and Above Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 52 01-Sep-2023

Neutral Lockout Group S/N: 4000089209 and Above REF NO PART NO QTY DESCRIPTION

0010 5418767A 1 WELD, NEUTRAL LOCK SHAFT, SRS - BLK 0020 5101123 2 BEARING, 1/2 FLANGED, PLASTIC BALL 0030 5025011X16 1 BOLT, 5/16-18 X 2" GD5 YZ 0040 5025127 2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 0050 5025010X6 4 BOLT, 1/4"-20 X 3/4" GD5 YZ 0060 5025154 4 WASHER, 1/4 SAE 0070 5025391 4 NUT, 1/4-20 Hex Nylock Flange 0080 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0090 5025011X18 1 BOLT, 5/16-18 X 2-1/4" GD5 YZ 0100 5103767 1 SPACER, .33 X .63 X .36, PM, CZ 0110 5025055X12 1 BOLT- 5/16-18 X 1-1/2 GD5 TFL 0120 5023323 1 CLEVIS, 5/16-24, STEEL, CLEAR ZINC 0130 5023212 1 NUT, 5/16-24 HEX, LH 0140 5104494 1 BALL JOINT 5/16-24 LH FEMALE BRONZE RACE 0150 5104695 1 ROD, 5/16-24 X 3.25, CZ 0160 5025033 1 NUT, Hex, 5/16-24 0170 5025213X7 1 PIN, CLEVIS, 5/16 X 1, PLATED 0180 5025211 1 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 53 01-Sep-2023

Operator Compartment Group - S/N: 2017890934 & Below Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 54 01-Sep-2023

Operator Compartment Group - S/N: 2017890934 & Below REF NO PART NO QTY DESCRIPTION

0010 5021499 2 BEARING, FLANGE 0020 5104452 1 KNEE PAD, STAND-ON 0030 5104593 2 BUMPER, RUBBER 0040 5415115A 1 WELD, FOOT PLATFORM, SRSZ3 - BLK 0050 5025011X8 10 BOLT, 5/16-18 X 1" GRD5 YZ 0060 5025013X10 4 BOLT, 3/8-16 X 1-1/4" GD5 CZ 0070 80003675 6 NUT, 5/16-1/8, HEX, CNTR LK, ZINC PHOS/OIL 0080 5025332 3 NUT, 1/2-13 Hex Side Lock 0090 5022847 1 SPRING-EXT, 1.04 ODX6.935LGX.148WR, BLK 0100 5104640 1 SHOCK / SPRING ASSEMBLY 0110 84008611 1 LINKAGE 0120 5022846 2 BEARING-FLANGE, 5/8 0130 5104620 2 SPACER, STEP, .39 X 1.00 X .69, CZ 0140 5025013X44 1 BOLT, 3/8-16 X 5-1/2" GD5 CZ 0150 5025096 4 NUT, 3/8-16 HEX NYLON LOCK 0160 5025328X12 1 PIN, CLEVIS, 1/2 X 1-1/2, PLATED 0170 1702779 2 JOINT-BALL .500-20 THD .500ID, CLR ZINC 0180 5025017X18 1 BOLT, 1/2-13 X 2-1/4" GD5 CZ 0190 5025540 1 PIN, SURE LOCK COTTER, .09 X .75, CZ 0200 5104654 2 SPACER, .33 X .63 X .25, CZ 0210 5104655 2 SPACER, .328 X 1.0 X .85, CZ 0220 5100520 2 SPACER, .52 X 1.00 X .22, PM, CZ 0230 5104663 1 ROD, THREADED, 1/2-20 X 2.25 0240 5025155 12 WASHER, 5/16" SAE 0250 5025165 2 WASHER, 3/8" Fender 0260 5104658 2 SPACER, .52 X .74 X 1.50, CZ 0270 5025017X20 2 BOLT, 1/2-13 X 2-1/2" GD5 CZ 0280 5415781B 1 PLATE, PAD MOUNT, SRS - RED 0290 5025089 2 NUT, 1/2-20 Hex Jam 0300 5025337 6 WASHER, 5/16" USS 0310 5025011X14 2 BOLT, 5/16-18 X 1-3/4" GD5 YZ 0320 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0330 5022673 2 BUMPER, RUBBER, 1/4-20 0340 5025391 2 NUT, 1/4-20 Hex Nylock Flange 0350 5025011X6 2 BOLT, 5/16-18 X 3/4 GD5 0360 1960086 2 SCREW, TRUSS HD TORX DR5/16-18X0.875 BLK 0370 5415381A 1 PLATE, OPC LINK, STAND ON - BLK 0380 5025394 1 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0390 5025156 4 WASHER, 3/8 SAE 0400 5025164 2 WASHER, 5/16" Fender 0410 84007981 1 PIN, Clevis 0420 5025203X6 1 * PIN, COTTER, 1/8" X 3/4 0430 5025293 1 WASHER, 3/8" GR. 9 FLAT

Not F or

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 55 01-Sep-2023

Operator Compartment Group - S/N: 2017890935 & Above Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 56 01-Sep-2023

Operator Compartment Group - S/N: 2017890935 & Above REF NO PART NO QTY DESCRIPTION

0010 5021499 2 BEARING, FLANGE 0020 5104452 1 KNEE PAD, STAND-ON

-(S/N: 4000875836 and below) 0020 5108192 1 KNEE PAD, STAND ON

-(S/N: 4000875837 and above) 0030 5104593 2 BUMPER, RUBBER 0040 5415115A 1 WELD, FOOT PLATFORM, SRSZ3 - BLK 0050 5025011X8 10 BOLT, 5/16-18 X 1" GRD5 YZ 0060 5025013X10 4 BOLT, 3/8-16 X 1-1/4" GD5 CZ 0070 80003675 5 NUT, 5/16-1/8, HEX, CNTR LK, ZINC PHOS/OIL 0080 5025332 3 NUT, 1/2-13 Hex Side Lock 0090 5022847 1 SPRING-EXT, 1.04 ODX6.935LGX.148WR, BLK 0100 5104640 1 SHOCK / SPRING ASSEMBLY 0110 84008611 1 LINKAGE 0120 5022846 2 BEARING-FLANGE, 5/8 0130 5104620 2 SPACER, STEP, .39 X 1.00 X .69, CZ 0140 5025013X44 1 BOLT, 3/8-16 X 5-1/2" GD5 CZ 0150 5025096 4 NUT, 3/8-16 HEX NYLON LOCK 0160 5025328X12 1 PIN, CLEVIS, 1/2 X 1-1/2, PLATED 0170 1702779 2 JOINT-BALL .500-20 THD .500ID, CLR ZINC 0180 5025017X16 1 BOLT, 1/2-13 X 2" GD5 CZ 0190 5025540 1 PIN, SURE LOCK COTTER, .09 X .75, CZ 0200 5104654 1 SPACER, .33 X .63 X .25, CZ 0210 5104655 1 SPACER, .328 X 1.0 X .85, CZ 0220 5100520 2 SPACER, .52 X 1.00 X .22, PM, CZ 0230 5104663 1 ROD, THREADED, 1/2-20 X 2.25 0240 5025155 11 WASHER, 5/16" SAE 0250 5025165 1 WASHER, 3/8" Fender 0260 5104658 2 SPACER, .52 X .74 X 1.50, CZ 0270 5025017X18 2 BOLT, 1/2-13 X 2-1/4" GD5 CZ 0280 5415781B 1 PLATE, PAD MOUNT, SRS - RED 0290 5025089 2 NUT, 1/2-20 Hex Jam 0300 5025337 4 WASHER, 5/16" USS 0310 5025011X14 1 BOLT, 5/16-18 X 1-3/4" GD5 YZ 0320 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0330 5022673 2 BUMPER, RUBBER, 1/4-20 0340 5025391 2 NUT, 1/4-20 Hex Nylock Flange 0350 5025011X6 2 BOLT, 5/16-18 X 3/4 GD5 0360 1960086 1 SCREW, TRUSS HD TORX DR5/16-18X0.875 BLK 0370 5107798 1 PLATE, LINK, OPC, SRSZ 0380 5025394 1 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0390 5025156 4 WASHER, 3/8 SAE 0400 5025164 2 WASHER, 5/16" Fender 0410 84007981 1 PIN, Clevis 0420 5025203X6 1 * PIN, COTTER, 1/8" X 3/4 0430 5025293 1 WASHER, 3/8" GR. 9 FLAT 0440 5041930 1 SPACER, .38 X .50 X .27, CZ 0450 5103944 1 GROMMET, 7/8"ID, 1/4" THICK STK

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 57 01-Sep-2023

Parking Brake Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 58 01-Sep-2023

Parking Brake Group REF NO PART NO QTY DESCRIPTION

0010 5020095 1 GREASE FITTING, 1/4-28 Straight 0020 5021098 2 BEARING, BRONZE FLANGE, 3/4" 0030 5025033 2 NUT, Hex, 5/16-24 0050 5025010X6 2 BOLT, 1/4"-20 X 3/4" GD5 YZ 0060 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 0080 5025211 1 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ 0090 5025154 4 WASHER, 1/4 SAE 0100 5025213X8 2 PIN, CLEVIS, 5/16 X 1, PLATED 0110 5025337 4 WASHER, 5/16" USS 0120 5025391 4 NUT, 1/4-20 Hex Nylock Flange 0130 5100171 1 GRIP, BLACK FLEXIBLE 0140 5101123 1 BEARING, 1/2 FLANGED, PLASTIC BALL 0150 5105314 1 ROD, BRAKE, Z3

-(S/N 2018025018 & Below) (Refer to Note: *) 0150 5105701 1 ROD, BRAKE, Z3

-(S/N 2018025019 & Above) 0150-10 5020047 1 COLLAR, 5/16" Set

-(S/N 2018025018 & Below Only) 0160 5415110A 1 WELD, LOWER BRAKE SHAFT, SRSZ3 - BLK 0170 5415453A 1 WELD, BRAKE PIVOT, SRSZ3 - BLK 0180 5415129A 1 LINK, BRAKE, SRSZ3 - BLK 0190 5100385 2 SPRING, COMP. 1/2 ID X .140 WIRE X 3.25 0200 5104695 1 ROD, 5/16-24 X 3.25, CZ 0220 5025392 5 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0230 5025394 6 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0240 5104494 1 BALL JOINT 5/16-24 LH FEMALE BRONZE RACE 0250 5023212 1 NUT, 5/16-24 HEX, LH 0260 5025013X36 1 BOLT, 3/8-16 X 4-1/2" GD5 CZ 0270 80002736 2 PIN, 3/32 X 0.750, COT, ZINC/CLEAR 0280 5104768 1 SHAFT, UPPER BRAKE ROD, SRSZ 0290 5104270 1 BEARING, 5/8" FLANGED, PLASTIC BALL 0300 5010580 1 COLLAR, 1/2 SET (1/2 SPLIT COLLAR IN MODEL) 0310 2860664 1 SCREW-HEX SEMS WSHR 1/4-20 X.88 DOG PT 0320 5106314 1 PLATE, BRAKE TAB, STAND-ON 0330 5416876A 1 PLATE, BRAKE LEVER, SRSZ - BLK 0340 84008450 2 MOUNT 0350 5105574 2 ROD, LOWER BRAKE CONTROL, CZ 0360 5020047 2 COLLAR, 5/16" Set 0370 5023323 2 CLEVIS, 5/16-24, STEEL, CLEAR ZINC 0380 5102773 2 BUSHING, .38ID X .47 OD X .38L, FL 0410 5041930 2 SPACER, .38 X .50 X .27, CZ 0430 5025013X10 1 BOLT, 3/8-16 X 1-1/4" GD5 CZ 0450 5025034 1 NUT, 3/8-16 HEX, YZ 0460 5105603 2 SPACER, STEP, .328 X 1.00 X .625, CZ 0470 5413575A 2 PLATE, BRAKE ARM, IS2100 - BLK 0480 5025100 1 NUT, Hex, Side Lock, 3/8-16 0490 5025013X18 1 BOLT, 3/8-16 X 2-1/4" GD5 CZ 0500 5025011X10 2 BOLT, 5/16-18 X 1-1/4" GD5 YZ

Note: * If replacing this rod, also order item #0580 and re-assemble to diagram. Note: **Older models may feature different hardware that is oriented differently, please update to the current hardware and orientation.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 59 01-Sep-2023

Parking Brake Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 60 01-Sep-2023

Parking Brake Group REF NO PART NO QTY DESCRIPTION

0510 5025156 5 WASHER, 3/8 SAE 0520 5025013X8 5 BOLT, 3/8-16 X 1" GD5 CZ 0530 5025213X7 3 PIN, CLEVIS, 5/16 X 1, PLATED 0540 5025203X6 2 * PIN, COTTER, 1/8" X 3/4 0550 5025011X8 2 BOLT, 5/16-18 X 1" GRD5 YZ 0560 ----- 2 HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR 0580 5025639 1 RUE - 10 RETAINING PIN, .047"X5/16 SHAFT 0590 5025055X12 1 BOLT- 5/16-18 X 1-1/2 GD5 TFL

-(Refer to Note: **) 0600 5025032 1 NUT, 5/16-18 HEX

-(Refer to Note: **)

Note: * If replacing this rod, also order item #0580 and re-assemble to diagram. Note: **Older models may feature different hardware that is oriented differently, please update to the current hardware and orientation.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 61 01-Sep-2023

Spindle Service Parts - 5104744 Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 62 01-Sep-2023

Spindle Service Parts - 5104744 REF NO PART NO QTY DESCRIPTION

0010 5104807 1 SUB ASM, SPINDLE, SMALL IRON -(Includes Ref Nos 2 & 3)

0020 5023330 2 BEARING, .98 X 2.44 X .67 0030 5061099 1 SPACER, 1.00 X 1.25 X 1.75 0040 5049793 2 TRASH SHIELD 0050 5023329 1 FITTING, 1/8 NPT STR, SHORT 0060 5061100 1 SHAFT, SPINDLE 0070 5023296 1 FITTING, RELIEF, 1-5 PSI

Not F or R

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 63 01-Sep-2023

Transaxle Drive Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 64 01-Sep-2023

Transaxle Drive Group REF NO PART NO QTY DESCRIPTION

0010 5025394 2 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0020 5025128 1 NUT, 3/8-16 Hex Large Serrated Flange 0030 5025017X20 1 BOLT, 1/2-13 X 2-1/2" GD5 CZ 0040 5105542 1 PULLEY, IDLER-V, 5.00OD X .510ID, CZ 0050 5103262 2 SPACER, IDLER ARM, 1/2, PM 0060 7078243 2 BEARING, BALL, AXLE 0070 5414039AA 1 WELD, TENSION ARM, PUMP DRIVE - BLK 0080 5025396 3 NUT, Hex Flange, Nylock, 1/2-13 0090 5101794 1 PULLEY, IDLER, 5" OD, 1" FACE, 5.75 FLANGE 0100 5025017X36 1 BOLT, 1/2-13 X 4-1/2" GD5 YZ 0110 5105316 1 BELT, B-SEC, 80.79, RAW EDGE, OPTI 0120 5025429 1 EYEBOLT, 3/8-16 X 4, 2.13THRD, .75EYE, C 0130 5104676 1 SPRING EXT, 1.50ODX4.75LGX.177WR, BLK 0140 5025013X20 1 BOLT, 3/8-16 X 2-1/2" GD5 CZ 0150 5103812 1 SPACER, .52 X .84 X 1.53, PM 0160 5044609 1 SPACER, .52 X 1.00 X .38, CZ 0180 5025165 1 WASHER, 3/8" Fender 0190 5025324X32 1 BOLT, 1/2-13 X 4", CARRIAGE 0200 5101413 1 SPACER, .52 X 1.00 X 1.83, CZ 0210 5105466 1 SPACER, .52 X 2.00 X 1.13, CZ 0220 5100896 1 SPACER, .390 X 1.00 X 1.00 - YZ 0230 5105297 1 SPACER, .39 X .63 X .375M DOM CZ 0240 5025156 1 WASHER, 3/8 SAE 0250 5025158 1 WASHER, 1/2 SAE

Not F or

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 65 01-Sep-2023

Transaxle Service Parts Group - 5105286 / 5105285 Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 66 01-Sep-2023

Transaxle Service Parts Group - 5105286 / 5105285 REF NO PART NO QTY DESCRIPTION

1 ----- 1 KIT, MAIN HOUSING -(Refer to Note: *)

2 ----- 1 KIT, SIDE HOUSING -(Refer to Note: *)

7 ----- 1 OIL -(Refer to Note: *)

8 5022905X1 1 SEALANT 10 ----- 1 KIT, SHOCK VALVE

-(Refer to Note: *) 11 ----- 1 KIT, SHOCK VALVE

-(Refer to Note: *) 17 ----- 14 SCREW, HOUSING

-(Refer to Note: *) 18 ----- 2 SCREW, HEX FLANGE 3/8-16 X 1.5

-(Refer to Note: *) 19 ----- 2 SCREW, HEX FLANGE 3/8-16 X 3.0

-(Refer to Note: *) 20 ----- 2 KIT, CENTER SECTION

-(Refer to Note: *) 22 ----- 1 SHAFT, MOTOR

-(Refer to Note: *) 23 ----- 1 KIT, CYLINDER BLOCK (16cc)

-(Refer to Note: *) 27 ----- 1 BEARING, THRUST, MOTOR

-(Refer to Note: *) 30 ----- 1 RING, RETAINING

-(Refer to Note: *) 31 1715302 1 SPRING-CYLINDER BLOCK 2000025 33 ----- 1 KIT, BRAKE ROTOR, GEAR

-(Refer to Note: *) 34 1706130 1 RING-SNAP (44145) 35 ----- 1 MAGNET

-(Refer to Note: *) 36 ----- 2 BOLT, SELF-TAPPING

-(Refer to Note: *) 40 ----- 1 SWASHPLATE, MACHINED

-(Refer to Note: *) 45 ----- 1 BEARING, THRUST, PUMP

-(Refer to Note: *) 49 ----- 1 KIT, CYLINDER BLOCK (12cc)

-(Refer to Note: *) 54 ----- 1 KIT, CHARGE RELIEF

-(Refer to Note: *) 57 ----- 1 KIT, CHARGE PUMP

-(Refer to Note: *) 61 5104385X3 1 KIT, INPUT SHAFT (BEARING & SHAFT ONLY) (SV) 64 ----- 1 SPACER, INPUT

-(Refer to Note: *) 66 ----- 1 RING, RET, INTERNAL, INPUT

-(Refer to Note: *) 70 ----- 1 JACKSHAFT

-(Refer to Note: *) 71 ----- 1 KIT, GEARS

-(Refer to Note: *) 73 ----- 1 GEAR, 62T

-(Refer to Note: *)

Note: * See your authorized Hydro-Gear dealer for replacement parts.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 67 01-Sep-2023

Transaxle Service Parts Group - 5105286 / 5105285 Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 68 01-Sep-2023

Transaxle Service Parts Group - 5105286 / 5105285 REF NO PART NO QTY DESCRIPTION

74 ----- 3 WASHER, JACKSHAFT -(Refer to Note: *)

90 ----- 1 SPACER, SPRING -(Refer to Note: *)

91 ----- 1 KIT, BRAKE, LH -(Refer to Note: *)

92 5104652 1 RETAINING RING, BRAKE ARM, ZT4400 (SV) 96 ----- 1 SPRING, BRAKE RETURN

-(Refer to Note: *) 100 5104385X1 1 KIT, FILTER (SV) 102 ----- 1 KIT, FILTER PLUG

-(Refer to Note: *) 103 ----- 1 TUBE, FILTER, LH

-(Refer to Note: *) 104 ----- 1 CLAMP, TUBE, FILTER

-(Refer to Note: *) 105 ----- 1 GROMMET

-(Refer to Note: *) 110 ----- 1 BEARING, BALL, AXLE INBOARD

-(Refer to Note: *) 111 ----- 1 RING, RETAINING, .125, EXTERNAL, SPRING

-(Refer to Note: *) 112 ----- 1 SHAFT, AXLE

-(Refer to Note: *) 113 ----- 1 WASHER, AXLE, SHAFT BEARING

-(Refer to Note: *) 114 ----- 1 BEARING, BALL, OUTBOARD

-(Refer to Note: *) 117 ----- 1 KEY, SHAFT, AXLE

-(Refer to Note: *) 118 5104385X7 1 KIT, HUB 5 BOLT (SV) 120 ----- 1 NUT, HEX 1-20 SLOTTED

-(Refer to Note: *) 121 ----- 1 PIN, COTTER, 9/64 X 2 EXTENDED PRONG

-(Refer to Note: *) 122 5101987X5 1 AXLE CAP, ZT5400 124 ----- 1 TUBE, AXLE 1.40 X2.22

-(Refer to Note: *) 125 ----- 1 PLATE, BYPASS

-(Refer to Note: *) 126 ----- 1 BYPASS ROD

-(Refer to Note: *) 127 ----- 1 BYPASS RETAINING RING 2

-(Refer to Note: *) 128 ----- 1 BYPASS RETAINING RING 1

-(Refer to Note: *) 154 ----- 1 ARM, CONTROL, LH

-(Refer to Note: *) 156 ----- 1 TWHCS, 5/16-24 X 1.00 (PATCH)

-(Refer to Note: *) 158 ----- 1 SPACER, .320X1.005X.179

-(Refer to Note: *) 159 ----- 1 ARM, NEUTRAL, LH

-(Refer to Note: *) 160 ----- 1 WASHER, .34X.88X.06

-(Refer to Note: *)

Note: * See your authorized Hydro-Gear dealer for replacement parts.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 69 01-Sep-2023

Transaxle Service Parts Group - 5105286 / 5105285 Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 70 01-Sep-2023

Transaxle Service Parts Group - 5105286 / 5105285 REF NO PART NO QTY DESCRIPTION

161 ----- 1 SHCS, 5/16-24 X .875 (PATCH) 162 ----- 1 ASSEMBLY, RTN 164 5105285X1 1 SPRING, EXTENSION RTN-44LBS, H/G 51605 199 5109995 1 BRAKE SHAFT SEAL, 55523, ZT4400 & ZT5400

-(55523) 200 5104385X2 1 KIT, SEAL (SV) 200-1 5104385X4 1 KIT, INPUT SEAL (SV) 200-2 5104385X6 1 KIT, CONTROL ARM SEAL, HG# 55526 200-3 5104385X5 1 KIT, AXLE SEAL (SV) 201 1735490 1 KIT, L.H. Control Arm

Note: * See your authorized Hydro-Gear dealer for replacement parts.

Footnotes:

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 71 01-Sep-2023

Wheel & Tire Group Mfg. No: 5901691Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

n

Copyright Briggs & Stratton. All Rights reserved 72 01-Sep-2023

Wheel & Tire Group REF NO PART NO QTY DESCRIPTION

0010 5023279 2 TIRE ASSM, 13 X 6.5 - 6, FF / TB 0010-10 5022631SX2 4 BEARING, Tapered Roller

-(2 per tire) 0010-20 5022631SX3 4 SEAL, GREASE

-(2 per tire) 0010-30 5022631SX4 4 BEARING, RACE

-(2 per tire) 0020 5104029 2 TIRE/WHEEL ASM, 24 X 12.00-12, TURF SMART

-(S/N: 4000771923 and below) 0020 5023365 2 TIRE WHEEL ASM, 24X12.00-12, TURF MASTER

-(S/N: 4000771924 and above) 0020-10 5104029X1 2 TIRE, 24X12.00-12, TURF SMART

-(S/N: 4000771923 and below) 0020-10 5023240X1 2 TIRE, 24 X 12 X 12

-(S/N: 4000771924 and above) 0020-20 5023364 2 WHEEL, 12 X 8.5 0030 5020601 10 NUT, 1/2-20, FOR WHEEL BOLT SILVER

-(Torque lug nuts to 90 ft. lbs. [122 Nm]) 0040 5025158 2 WASHER, 1/2 SAE 0050 5025017X72 2 BOLT, 1/2-13 X 9" GD5 YZ 0060 5025396 2 NUT, Hex Flange, Nylock, 1/2-13 0070 5103594 4 DEBRIS, COVER, CASTER WHEELS 0080 5103649 2 BEARING ADJUSTER, SPACER, 7.062 LG 0090 5103650 2 NUT, BEARING ADJUSTER, AXLE

Not F or

epro duct io

n

Copyright Briggs & Stratton. All Rights reserved 73 01-Sep-2023

in/lbs ft/lbs

3

Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance 20%)

Property Class

Class 8.8 Class 10.9 Class 12.9

Size Of Hardware Nm. Nm. Nm. Nm.

M3 1.28 2.90 5.75

9.9 16.5

24 48 83

132 200 275 390 530 375 995

1350 1830 2360 3050

13.44 1.80 4.10 8.10

14 23 34 67

117 185 285 390 550 745 960

1400 1900 2580 3310 4290

19.2 22.92 2.15 M4 30.72 43.44 52.56 4.95 M5 60.96 5.97 7.15

16.5 9.7

M6 7.3 10.3 12.1 M7 12.1 16.9 19.9 27 M8 17.7 25 29 40 M10 35 50 59 81 M12 61 86.2 103 140 M14 101 136 162 220 M16 147 210 250 340 M18 202 287 346 470 M20 290 405 486 660 M22 390 559 656 890 M24 497 708 840 1140 M27 733 1032 1239 1680 M30 995 1401 1681 2280 M33 1349 1902 2278 3090 M36 1740 2441

3798 2935 3980

M39 2249 3163

Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance 20%)

Hardware Grade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Ofin/lbs ft/lbs

in/lbs ft/lbs

in/lbs ft/lbs

in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 29 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES 1. These torque values are to be used for all hardware

excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5

torques. b. for flange whizlock nuts and screws - use 135% of

grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque

values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

No Marks

The guides and ruler furnished below are designed to help you select the appropriate hardware.

8.8 10.9 12.9

Class 5.6

5.6

5150

13.44 1.28 5.88

26.4 2.50 44.64 4.3

5.2 7.1 7.7 10.5 15 21

988 1340 759 1030 590 800 435 590 320 435 217 295 169 230 126 171

89 121 64 88 42 58 26 36

.56

Thread Diameter (mm)

Screw, 1/2- 16 x 2

Body Diameter

Diameter

Inside Diameter (in)

Nut, 1/2-16 0

1/4 3/41/2 21 1/4 3/41/2 1/4 3/41/2 1/4 3/41/2 4

90 10070 8050 6030 400 10 20

Thread Diameter (mm)

Nut, M8 Screw, M8- 1.25 x 25

Distance between threads (mm)

Body Length (in)

Body Length (mm)

3/8 Bolt or Nut Wrench9/16

5/16 Bolt or Nut Wrench1/2

1/4 Bolt or Nut Wrench7/16

1/2 Bolt or Nut Wrench3/4

7/16 Bolt or Nut Wrench (Bolt)5/8 Wrench (Nut)11/16

in/lbs

Threads per inch

Threads per inch

Body Length

Body

When a washer or nut is identified as 1/2 (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads).

When bolt or capscrew is identified as 1/2 - 16 x 2 (M8 - 1.25 x 50), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (distance between threads). The final number is the body length of the bolt or screw, 2 inches (50mm).

Standard Hardware Sizing

M6 Bolt or Nut Wrench10mm

M8 Bolt or Nut Wrench13mm

M10 Bolt or Nut Wrench17mm

M12 Bolt or Nut Wrench19mm

M14 Bolt or Nut Wrench22 mm

Wrench & Fastener Size Guide

Copyright Briggs & Strat